Sony Anycast station AWS-G500, Operating Instructions Manual

Page: 216 / 316

Chap
te
r 3
O
per
at
ion
s
216
Video/Audio Signal Adjustments and Settings
Because there is no offset function for PAL, this setting is only enabled when
[PGM OUT] is set to [NTSC].
4
Press the MENU button to close the menu.
Setting the RGB Output Signal Format
Set the format of the signal output from the RGB output connectors on the rear panel.
1
Press the MENU button.
2
In the top menu, select [Video Output].
3
1
Select [RGB OUT], and confirm;
2
select the combination of image size
and frequency or [Video RGB], and confirm.
[XGA], [SXGA], [WXGA]: Output format for a computer monitor
(computer RGB signals).
[Video RGB]: Output format for a video monitor (video RGB signals).
4
Press the MENU button to close the menu.
• Changing this setting may cause temporary breakup of the output video
and the output reference signal.
• If the video output signal format is PAL, then when the [XGA], [SXGA],
or [WXGA] setting is used, the top and bottom portions of the image will
be missing in the output from the composite video and S-video output
connectors. This can be remedied by setting [Video RGB], but in this case
the computer monitor output will not be available.
• When inputting RGB signals to an external display, the images may be
displayed at a different frame frequency from that of the RGB signal,
depending on the display device you are using. On such devices, the images
may appear to shake up and down slightly.
• When selecting [XGA], [SXGA], or [WXGA], we recommend that you
select 60 Hz when the video output signal is NTSC format, and 75 Hz
when the signal is PAL format.
Note
Caution
Notes
PGM OUT NTSC/60Hz
PGM OUT Aspect 4:3
PGM OUT Level
DV OUT
RGB OUT SXGA (60Hz)
Luminance Offset 0IRE B 0IRE
7.5IRE
1 2 3
PGM OUT NTSC/60Hz
PGM OUT Aspect 4:3
PGM OUT Level
DV OUT
RGB OUT SXGA (60Hz)
XGA(1024x768) 60Hz
75Hz
B SXGA(1280x1024) 60Hz
WXGA(1280x798) 60Hz
75Hz
Video RGB
1 2