manualshive.com logo in svg

Sony Anycast station AWS-G500, Operating Instructions Manual

Share
Download
Sony Anycast station AWS-G500 Operating Instructions Manual Download Page 172

  Chap

te

r 3 

 O
per

at

ion
s

172

Recording Video and Audio to an External Hard Disk

Recording Video and Audio to an External Hard 
Disk

Using the i.LINK connector (HDD) on an SD video interface module (BKAW-
570) or serial digital interface module (BKAW-580), you can record to an 
external hard disk the program outputs from the unit and all the input sources to 
the unit.

i.LINK connector (HDD):

 connect an external hard disk to record each input 

material (video + audio) (page 178) and record program output (video + 
audio) (page 177). Perform recording operations on this unit. 
You can also simultaneously record program output and each input material 
(ON LINE recording) (page 177). 

When recording on the external hard disk, be sure to read the section, “External 
Hard Disk” (page 12).

Formatting an External Hard Disk

Format an external hard disk in order to use it with this unit.
This unit uses the ext3 file system format.

We recommend that you reformat the external hard disk at regular intervals in 
order to avoid a drop in performance due to file fragmentation.

1

Connect the external hard disk to the i.LINK connector (6-pin) of the 
interface module.

Be sure to connect the external hard disk before powering on this unit.

2

Power on the external hard disk.

3

Press the 

1

 (power) button on the side panel to start up this unit.

The operation screen appears.

4

Press the MENU button.

5

In the top menu, select [File Manager].

Caution

Note

Caution

I.LINK

S VIDEO COMPOSITE

S VIDEO COMPOSITE

S400

SD

OFF

ON

OFF

ON

SD

i.LINK connector (6-pin)

Summary of Contents for Anycast station AWS-G500





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands