animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 27
Threshold Sun
If the solar intensity is above the "Threshold Sun On", the selected position is approached.
If the solar intensity is below the "Threshold Sun Off", the function is deactivated. Adjustment range from 0
kLux to 65 kLux.
Threshold Temperature
If the inside temperature is below the "Threshold Sun On", the selected position is approached (typically: 0 %
= open).
If the inside temperature is above the "Threshold Off", the function is deactivated. Adjustment range from
0 °C to 40 °C.
Delay time
Adjustment range for Delay Time On and Off: 0 to 255 minutes.
Solar Heating On
Setting the position of the motorized product in % (100 % = closed) and the angle in ° (for Venetian blinds),
adjustment range up to 90° = closed.
Solar Heating Off
Setting the position of the motorized product after enabling the function:
•
No Action:
The motorized products remain stationary in position.
•
Standard:
The motorized products move to the standard position. The standard position needs to be
defined once (s. chapter 6.5.1 System Settings).
•
Position:
The motorized products move to a set position. In the case of Venetian blinds, the defined
angle is set.
•
My Position:
The motorized products move to the intermediate position programmed in the motor
controller.
6.3.4 Maintain Heat
This function allows heat to be kept in the building by using sun protection. It is typically used outside work-
ing hours.
To enable the function, you need to move the "Maintain Heat" slider to the right.
You can navigate through the setting using the grey "forward" and "backward" arrows.
Sun sensors used
When setting the sensors, you selected between Compact Sensor (only three sun sensors) and Outside
Sensor Box (up to eight sensors). You now need to specify which sun sensors are to be used as reference
for this zone. When using multiple sensors, the lowest value always applies.
Temperature sensor used
In this section, you specify which temperature sensors used are to apply as reference for this zone.
Selecting the sun sensors:
Two Inside Sensor Boxes, each with two sensor connections, can be connected. As such, you can select a
maximum of four sensors
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......