animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 41
6.5.3.3 Touch
You can navigate through the setting process using the grey arrows.
Brightness: You can use the plus and minus buttons to adjust the brightness of the screen (in %). The
change is applied immediately.
Screensaver: You can enable the screensaver here and set when it should be applied (i.e. after how many
seconds of inactivity the screen should be put to sleep).
Clock: You can also enable the clock here and set when it should be displayed (i.e. after how many seconds
of inactivity).
If you wish to enable both the screensaver and the clock, it is important to ensure that the set times are
different. If the clock time is shorter than the screensaver time, the clock is enabled first and then the
screensaver. If the screensaver time is shorter than the clock time, the screensaver is enabled and remains
in place.
Hit "Lock Touch" to deactivate the touchscreen function, for example if you wish to clean the glass surface.
6.5.3.4 Heartbeat
Move the slider to the right to enable the automatic bus cable monitoring system. A cyclical signal guaran-
tees monitoring. Should this signal fail to arrive at the motor controllers, for example due to a cable break,
the end products/motorized products move to their safety position.
Repeat this for all zones as necessary.
6.5.3.5 Password
Assigning a password prevents unauthorized persons from changing parameters during operation."somfy" is
set as the default password. However, you can change the password here.
Setting:
"Use Control Password"
provides you with access to the operating controls. The controls will be locked
after an adjustable idle time of between 1 and 60 minutes.
"Use Settings Password"
provides you with access to all functions, except for safety functions.
"Use Security Password"
provides you with access to all safety functions.
"Set Remote Password"
provides you with access to the device with the corresponding network address.
Get in touch with your specialist if you have forgotten your password.
6.5.3.6 Network Config
With the first connection to a network, TouchBuco is automatically assigned an IP address. This is displayed
in the "Network" menu.
You can modify the network data if the device is to be integrated into an existing network with a fixed IP
address.
These settings are displayed after restarting the TouchBuco. Hit "Apply" to confirm your entry.
Remote access can be blocked or authorized via the "Enable remote access" field.
Remote access is password-protected. This can be changed in the password settings.
You can access the "DNS server" menu using the grey arrow buttons
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......