animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 12
In the "LOG" menu, current events such as switching commands, sensor values and system faults are rec-
orded over an extended time period (up to a maximum of 3 months).
The "SETTINGS" menu takes you to further configurations. This menu can be protected with a password.
2.1 Dashboard
This menu provides you with up-to-date information on all functions of the selected zone. In the left-hand
half, you can see which zone you are currently working on and what type of motorized product you are deal-
ing with. The right half shows all available functions. They are listed in order of priority (top priority first). You
can recognize the selected functions by their yellow circle. When a function is active, the circle is filled.
All functions are sorted by priority from top to bottom:
•
Alarm (the end products/shades are locked in the safety position)
•
Lock (only low-priority functions are locked)
•
Error (errors in the sensor technology are displayed)
•
Wind (the end products/shades are locked in the safety position)
•
Snow/Frost/Ice/Rain (the end products/shades are locked in the safety position)
•
Lock Timer (manual Control and low-priority functions are locked for a certain time)
•
Manual (local operation via button/TouchBuco is active)
•
Timer (scheduled switching commands)
•
Block Heat (power save function)
•
Solar Heating (power save function)
•
Maintain Heat (power save function)
•
Cooling (power save function)
•
Sun Protection (convenience function)
If multiple functions are active at the same time (for example wind and timer), only the function with the high-
est priority will be executed.
3 Control
3.1 Control
Standard: You can move the motorized products up and down using the up/down arrows. The stop button
allows you to stop the motorized products and the "my" button allows you to move them to the intermediate
position set (please refer to "Settings/Options", chapter 6.5).
Advanced: In this section, you can enter the precise position in per cent. In the case of Venetian blinds, you
can specify the angle in degrees. With roller shutters and Venetian blinds, 0 % corresponds to the raised
position, while with windows it means "closed". The set position is approached using the "Go to Position"
function.
Zone unlocked/locked: You can lock the zone entirely, for example to clean the windows, so that neither
local operation nor automatic control is possible. The zone can nevertheless be controlled using the
TouchBuco by means of safety commands.
Simply press the button again to release the function.
Sun enabled: You can use this button to switch the sun function on and off if the sun function is used for this
zone.
You can access the menu in order to control all zones together by using the grey arrows.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......