animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 25
ers continue to run in automatic mode. This setting offers the advantage that a person using the room for a
certain time retains control over the automatic commands.
Comfort:
All energy functions are deactivated; otherwise the function is identical to the "Manual Priority"
mode.
Once you have selected a switching command option, you can either set a fixed time of the day or a
switching time for the morning (“Dawn”) and the evening (“Dusk”) that is based on the time of the year.
Use the
"Diff time used"
to specify how many minutes (positive or negative) the switching time should be
enabled, offset from dusk.
Example: The sun rises at 5:39 am in Stuttgart on 18 May. The diff time used is set to -15 minutes, so the
switching command is executed at 5:24 am. You can enjoy the sunrise. Conversely, the sun sets at 9:02 pm
in Stuttgart on 18 May. The diff time used is set to + 15 minutes, so the switching action is only performed at
9:17 pm and you can enjoy the sunset.
By specifying a
"Lock time used"
, the switching command is executed on the basis of the automatically cal-
culated dawn and dusk times, although not before a certain time in the morning and not after a certain time
in the evening.
Example: Let us re-examine the above example. If the lock time used (summer time) is set to dawn at 7:00
am, the switching command will not be executed until 7:00 am rather than at 5:39 am. If the evening lock
time used is set to 8:00 pm, the switching command is already executed at 8:00 pm rather than at 9:17 pm.
During winter, when the sunrise may not occur until around 7:15 am, the lock time used of 7:00 am is disre-
garded, as the sunrise occurs after the lock time used.
COPY
Once you have set up a specific day (for example Monday), you can then apply this setting to other days of
the week. To do so, simply select the day you wish to copy from the “Mode” main menu (source) and then hit
"Copy". Now select the individual timers that you wish to copy to other days (you are still working on
Monday). Then highlight the days you wish to apply the settings to (target) and press "Copy" again. You can
also copy the setting to a different zone.
Now use the Back arrow button to return the starting menu. If you tap on the other days, you can now see
that the copied setting has been applied.
6.3.2 Block Heat
The heat protection function prevents the building from overheating. The motorized products are moved to a
suitable position, e.g. completely closed. The function is enabled based on the intensity of the sun and the
outside/inside temperature.
To enable the function, move the "Block Heat" slider to the right.
You can navigate through the setting using the grey "forward" and "backward" arrows.
Sun sensors used
Selecting the sun sensors: When setting the sensors, you selected between Compact Sensor (only three sun
sensors) and Outside Sensor Box (up to eight sensors). You now need to specify which sun sensors are to
be used as reference for this zone. When using multiple sensors, the highest value always applies.
Temperature sensor used
In this zone, you specify which temperature sensors are to apply as reference for this zone.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......