animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 19
Down Priority
The end products/motorized products in a zone move to the lower end limit and low-priority
manual and automatic commands are locked.
Off Time:
The disabling function is terminated from this time onwards. The switching time can either be a
fixed time of the day or be calculated automatically based on the dawn and dusk times (please see below for
an explanation on this). If desired, you can also specify the position to which the end products/motorized
products are to be moved once the lock time used has elapsed.
Switching commands at dusk:
H
Longitude and latitude must be set for this function to work. This is performed in the menu “Location” (s.
chapter 6.5.1.1. Location)
The switching times are identical to the programmed sunrise and sunset times. You can also select from two
versions:
Diff time used:
The switching time is offset from the sunset time, either positively or negatively.
Example: The sun rises at 5:39 am in Stuttgart on 18 May. The diff time used is set to -15 minutes, so the
switching command is executed at 5:24 am. You can enjoy the sunrise. Conversely, the sun sets at 9:02 pm
in Stuttgart on 18 May. The diff time used is set to + 15 minutes, so the switching action is only performed at
9:17 pm and you can enjoy the sunset.
Lock time used:
The switching command is executed on the basis of the automatically calculated dawn and
dusk times, although not before a certain time in the morning and not after a certain time in the evening.
Example: Let us re-examine the above example. If the lock time used (summer time) is set to dawn at 7:00
am, the switching command will not be executed until 7:00 am rather than at 5:39 am. If the evening lock
time used is set to 8:00 pm, the switching command is already executed at 8:00 pm rather than at 9:17 pm.
During winter, when the sunrise may not occur until around 7:15 am, the lock time used of 7:00 am is disre-
garded, as the sunrise occurs after the lock time used.
Copying:
Once you have set up a specific day (for example Monday), you can then copy this setting to other
days. To do so, simply select the day you wish to copy from the “Lock Timer” main menu (source) and then
hit "Copy". Now select the individual timers that you wish to copy to other days (you are still working on
Monday). Then highlight the days you wish to apply the settings to (target) and press "Copy" again. You can
also copy the setting to a different zone.
Now use the left arrow button to return the starting menu. If you tap on the other days, you can now see that
the copied setting has been applied.
6.1.6 Error
This sets the end position if an error is triggered.
Settings:
Position of the end product/motorized product in the event of an error signal ("Error On"):
Up Priority:
The end products/motorized products in a zone move to the upper end limit. Manual and
automatic commands with low priority are locked.
Down Priority:
The end products/motorized products in a zone move to the lower end limit. Manual and
automatic commands with low priority are locked.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......