animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 32
6.5 Options
This menu allows you to adjust further settings and data for the TouchBuco:
•
System settings: Location, Number of Zones, End Products etc.
•
MoCo Settings: Test Zones, Learn Zones etc.
•
Basic Settings: Date/Time, Locals, Password etc.
•
Load/Save: New project, Delete project, Save project, Copy project, etc.
•
Update Motor Controllers: Zone-based update
•
Wizard: Go to Wizard
H
Settings are saved and overwritten in the motor controllers.
Navigation:
Tap the icon or the white arrow below it to access the parameter settings. You can return the previous level
using the Back arrow at the top left.
6.5.1 System Settings
Touch the icon or the arrow below it to make settings for the individual system parameters.
6.5.1.1 Location
Enter your geographical location.
H
This entry is necessary if you wish to use the defined dusk time for switching times with timer functions
(with or without disabling function). When using a fixed switching time, this is not necessary.
This entry is also required if you use sun tracking for the sun protection function. When using a fixed position
and/or an angle, this is not necessary.
You can find the longitude and latitude for your location via the Internet, for example via "Google Maps":
Step 1: Navigate to http://maps.google.com via your web browser
Step 2: Enter your location
Step 3: Right-click on the icon and select "What is here?"
Step 4: Read off the longitude and latitude (up to 2 places after the decimal point) and enter it in the
TouchBuco: Latitude: 48.48° longitude: 8,95°
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......