animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 30
Activate timer 1...6
If you enable the "Update Position/Angle" function, the current position of the end product/motorized product
is also transmitted and approached for timer 1...6 in addition to the reset.
In the "Reset Time" section, you can set the time of the day at which the system is to be returned to auto-
matic mode. The reset is enabled when entering the time.
6.4 Sensors
You can define the sensor technology for the outdoor and indoor areas here (sun, wind, wind direction,
outside temperature, rain, inside temperature), as well as alter the designations of the individual sensors.
H
Only set up those things that have been connected.
Tap on the icons to make the settings.
6.4.1 Outside Sensors
You have five options:
No Sensor used:
You have not connected a sensor box (Compact Sensor or Outside Sensor Box).
Compact Sensor:
A compact weather station with integrated sensors, e.g. for wind, 3 x sun, outside
temperature and rain.
Outside Sensor Box:
A weather station to which multiple individual sensors can be connected.
M8:
A weather station with integrated sensors (wind, 4 x sun, outside temperature, rain).
Example for sensor orientation
M13:
A weather station with integrated sensors (wind, wind direction, 8 x sun, outside temperature, rain).
Example for sensor orientation:
You can navigate back using the grey arrows at the top left.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......