animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 35
Interior Roller blind:
Made of textile material and behaves like a roller shutter, i.e. just moving up and down.
Interior Plisseé:
Made of textile material and behaves like a roller shutter, i.e. just moving up and down.
Interior Vertical Venetian blind 90°/-90°:
This is a blind-based system that moves vertically and can be
turned.
Interior Curtain:
With electric drive for opening and closing interior curtains and shades.
Window opened inwards:
With electric drive for opening and closing inwards. When setting the other
parameters, please note that 0 % corresponds to the closed position and 100 % to the opened position. In
the “Standard position” menu, this default setting can nevertheless be inverted.
6.5.1.4 Standard Position
It’s the position to which the end products/motorized products move once certain functions have been
enabled, for example sun protection functions or the energy function.
The default setting for the standard position is 0 %. This means that the roller shutter or the Venetian blind is
in its upper end limit or that the window is closed. You can adjust the standard position here.
> You can access the angle end limit settings menu using the grey arrows.
Angle end limits
: Angle end limit default setting on Venetian blinds is 0° or -90° for slats that are fully open
or 90° for slats that are fully closed. For other motorized products, the angle end limits must be adjusted
accordingly.
> You can access the motor output inversion menu using the grey arrows.
Motor output inverted:
In this menu, all output commands for a zone can be inverted. Up button = position
100 % for lower end limit or window open.
H
This function is not settable for end products/motorized products with turning (e.g. Venetian blinds).
6.5.1.5 Reset
When performing a reset, the existing settings are replaced by the default settings specified by Somfy.
Saved project files or recordings remain intact.
Hit "Reset" to reset the settings.
6.5.1.6 Email Notification
Here you can enter the email address for error notifications and decide whether to enable this function.
If an error arises in TouchBuco or with the sensors, one of the following two error messages will be sent to the
specified e-mail address.
"Major Error"
Safety-related error. The complete system is locked in the safety position.
"Minor Error"
TouchBuco displays errors in the sensor menu. The sun-protection system nevertheless continues to work.
If you don’t want to be notified by email tap on “Enable notification”
With “Send test email” you can try out the email notification function.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......