animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 24
6.3 Energy
Alongside the comprehensive standard functions, there are further things that can be done to set up the sys-
tem for energy saving:
•
Mode
•
Block Heat
•
Solar Heating
•
Maintain Heat
•
Cooling
•
Reset to Auto
To execute these functions, you require the Inside Sensor Box, to which the inside temperature sensors are
connected.
6.3.1 Mode
These adjustment options allow the system behavior to be optimized: How do the system's automatic func-
tions behave after a motor controller has been operated manually?
In the
"Standard"
mode, all automatic commands are executed based on priority. Local operation on the
motor controller is possible at any time, except when a safety function is active.
In the
"Automatic"
mode, local operation is not possible. The system works exclusively automatically.
When using the
"Manual Priority"
mode, all automatic commands are executed and local operation on the
motor controller (e.g. Smoove UNO IB+) is possible at any time, except when a safety function is active.
Local operation also means that automatic commands (except for "Security") are no longer executed until the
next Reset command (setting via "Reset to Auto"). Only motor outputs that have been operated are affected
by this. The others continue to run in automatic mode. This setting offers the advantage that a person using
the room for a certain time retains control over the automatic commands.
In
"Comfort"
mode, all energy functions are deactivated; otherwise the function is identical to the "Manual
Priority" operating mode
The ENERGY TIMER can be used to enable the various modes via timer
The function is enabled when you move the slider to the right. You can set up to six switching commands per
week day (Monday to Sunday). Each switching command can be freely defined. "Not Used" is displayed as
standard, i.e. not set and not enabled.
Setting switching commands:
First select a day and then one of the six potential timers. The setting procedure always remains the same.
To return to the main menu, simply press the arrow at the bottom right.
Switching command options:
Not Used:
The command has not been set or activated.
Standard:
All automatic commands are executed based on priority. Local operation on the motor controller
is possible at any time, except when a safety function is active.
Automatic:
In the "Automatic" mode, local operation is not possible. The system works exclusively
automatically.
Manual Priority:
All automatic commands are executed and local operation on the motor controller (e.g.
Smoove UNO IB+) is possible at any time, except when a safety function is active. Local operation also
means that automatic commands (except for "Security") are no longer executed until the next Reset com-
mand (setting via "Reset to Auto"). Only motor outputs that have been operated are affected by this. The oth-
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......