animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 11
1.15 Copy Run/Tilt Times
You can copy the running time and angle from one zone to another zone. This can help save you time when
setting everything up.
"Source" represents the zone from which you are copying the setting. "Target" represents the zone to which
you are copying the setting. Select the source and target zone and then press "Copy" to confirm the copying
process. These parameters are sent to the motor controllers of the corresponding zone. The values can also
be modified individually here.
"Mech. Tol." designates the mechanical tolerance. This is only relevant for Venetian blinds. Depending on
the mechanical design, there may be a slight delay time between power being applied and the mechanical
movement actually starting (typically 0.2 to 0.3 seconds) when changing the direction of rotation. In the case
of roller shutters, however, this time should be 0 seconds.
The "Start Delay" function is primarily relevant for electronic drives. You should no longer alter this parameter
following careful and conscientious commissioning via the wizard. You can find further explanations on this
in the wizard under "End Product" in chapter 1.12.
1.16 Password
Assigning a password for the "Settings" menu
Assigning a password prevents third parties from making parameter changes (by mistake) while the system
is in operation. "somfy" is set as the default password. However, you can change the password here by
clicking on “Use Settings Password”.
1.17 Save Project
"New":
You can create a new project file here. However, the number of project files is restricted to just four
due to the memory available.
"Delete":
Select a file and delete it.
"Overwrite":
You can overwrite an existing project file here. Simply highlight the file and select "Overwrite".
"Copy from/to USB":
You can copy project files from and to a USB stick here. To avoid mistakes/confusion,
we recommend creating just one project file.
"Standard project file":
Following a power cut, this file is automatically loaded after approximately 2 minutes.
Info: A system that has not yet been configured would obviously not start up automatically.
2 Home
You are in the main screen. You can use the menu bar on the left of the screen to access further settings
and options. You can tell which menu you are currently viewing by the white background, which also has a
vertical yellow pattern.
The "HOME" menu shows the current status of the individual zones (zone 1 to zone 4/8): The active function
and the position of the end products/motorized products. You can access the "Dashboard" via the arrow at
the bottom right. You can gain detailed information on all functions here.
You can adjust the zones individually in the "CONTROL" menu: Up, down, stop, intermediate position (my)
and freely definable position. You can also lock/unlock the zones, as well as activating/deactivating the
automatic sun-tracking system.
In the "SENSORS" menu, you can see which sensor inputs are connected, as well as the current sensor values.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......