animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 20
6.2 Comfort
The "Timer" and "Sun" convenience functions can be set manually. To set these functions, simply tap the
icon or the arrow at the bottom right.
6.2.1 Timer
This function is used to move end products/motorized products at adjustable times to a position where they
remain until released. From this time onwards, local operations (via buttons, radio functions, etc.) are not
locked. However, low-priority functions, such as sun or energy functions, are locked during the active period
of the timer.
You can set up to six switching commands per week day (Monday to Sunday). Each switching command can
be freely defined. "Not Used" is displayed as standard, i.e. not set and not enabled.
Enabling the function:
The function is enabled when you move the slider to the right.
Setting a switching command with disabling function:
First select a day and then one of the six potential switching commands. The setting procedure always
remains the same. To return to the main menu, simply press the arrow at the bottom right.
Switching command options:
Not Used:
The command has not been set or enabled.
On Time:
The disabling function is active from this time onwards. The timing can either be a fixed time of the
day or be based on the dawn and dusk times (please see below for an explanation on this). The behavior of
the motorized product is defined after setting the timing:
Off Time:
The Timer function is terminated from this time onwards and low-priority functions, such as the
sun protection function, can be reactivated. The switching time can either be a fixed time of the day or be
calculated automatically based on the dawn and dusk times (please see below for an explanation on this).
You can define and enable a position or, in the case of Venetian blinds, also the angle, so that the motorized
products move to the set position at this time.
Single Event:
At this time, a command is executed one time and the timer function is then no longer active.
This has the effect that the sun protection function for example cannot be executed.
H
If you wish to use multiple switching times in the morning or evening, please note that a "On Time"
switching command must always be followed by either a "Single Event" or a "Off Time" switching com-
mand. For example, if you set a "On Time" command twice in a row, only the first "On Time" switching
command will be executed.
Switching commands at dusk:
H
Longitude and latitude must be set for this function to work. This is performed in the menu “Location” (s.
chapter 6.5.1.1. Location)
The switching times are identical to the programmed sunrise and sunset times. You can also select from two
versions:
Diff time used:
The switching time is offset from the sunset time, either positively or negatively.
Example: The sun rises at 5:39 am in Stuttgart on 18 May. The diff time used is set to -15 minutes, so the
switching command is executed at 5:24 am. You can enjoy the sunrise. Conversely, the sun sets at 9:02 pm
in Stuttgart on 18 May. The diff time used is set to + 15 minutes, so the switching action is only performed at
9:17 pm and you can enjoy the sunset.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......