![background image](http://html.mh-extra.com/html/somfy/animeo-ib-4-zone-touch-building-controller/animeo-ib-4-zone-touch-building-controller_manual_1317459031.webp)
animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 31
Setting:
Selecting the Outside Sensors:
Compact Sensor, Outside Sensor Box, Weather Station M8 or Weather Station M13.
Master:
When operating multiple TouchBuco units with a single weather station, only one TouchBuco unit may be
selected as "Master". None of the other TouchBuco units may have the "Master" checkbox activated.
Selecting the individual sensors when connecting the Outside Sensor Box:
Select the sensors that are connected. The systems will report an error in the case of incorrect selections, as
it does not receive complete data from the weather station. The sensor options are as follows:
•
1 to 8 sun sensors
•
1 or 2 wind sensors. You can choose between "Heated" and "Standard" (= non-heated). An incorrect selec-
tion will lead to incorrect measured values.
•
1 wind direction sensor
•
Other sensors: Outside Temperature (Out Temp.) and Rain
6.4.2 Inside Sensors
You can connect one or two Inside Sensor Boxes. Up to two inside temperature sensors can be fitted to
each Inside Sensor Box.
Sensor inputs 1 - 4 on the device can be used for key switches. When activated, the top priority is active
(alarm).
Sensor inputs 5-8 on the device can be used as area sensors.
Setting:
1. Select the Inside Sensor Box
2. Select the individual Inside Temperature Sensors:
Select the sensors that are connected. The systems will report an error in the case of incorrect selections, as
it does not receive complete data from the Inside Sensor Box.
6.4.3 Sensor Alias
In this menu, you can assign dedicated names to each of the sensors. Simply tap on the pencil icon. You
can then use the grey arrows to navigate through the individual sensor options.
Sun alias:
You can assign dedicated designations for the 8 potential sun sensors here. Simply tap on the
pencil icon to get started.
Wind alias
: You can assign dedicated designations for the 2 potential wind sensors and the wind direction
here. Simply tap on the pencil icon to get started.
Other sensor alias:
You can assign dedicated designations for "Rain" and "Outside Temperature" here.
Simply tap on the pencil icon to get started.
Inside temperature alias
: You can assign dedicated designations for the 4 potential inside temperature sen-
sors here. Simply tap on the pencil icon to get started.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......