SMC Networks 8926EM Management Manual Download Page 263

Page: 263 / 792

Displaying Detailed Device Statistics

12-13

Displaying Detailed Device Statistics

Use the LLDP Device Statistics Details screen to display detailed statistics for
LLDP-capable devices attached to specific interfaces on the switch.

Field Attributes

•

Frames Discarded

– Number of frames discarded because they did not conform

to the general validation rules as well as any specific usage rules defined for the
particular TLV.

•

Frames Invalid

– A count of all LLDPDUs received with one or more detectable

errors.

•

Frames Received

– Number of LLDP PDUs received.

•

Frames Sent

– Number of LLDP PDUs transmitted.

•

TLVs Unrecognized

– A count of all TLVs not recognized by the receiving LLDP

local agent.

•

TLVs Discarded

– A count of all LLDPDUs received and then discarded due to

insufficient memory space, missing or out-of-sequence attributes, or any other
reason.

•

Neighbor Ageouts

– A count of the times that a neighbor’s information has been

deleted from the LLDP remote systems MIB because the remote TTL timer has
expired.

Web

– Click LLDP, Device Statistics Details.

Figure 12-10 LLDP Device Statistics Details

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8926EM

Reviews:

Related manuals for 8926EM

Brands by name

Popular brands

SMC Networks 8926EM, Management Manual

Search results

Summary of Contents for 8926EM

Reviews:

Related manuals for 8926EM

Brands by name

Popular brands