System Management Commands
23-30
23
Related Commands
show log (23-31)
show logging
This command displays the configuration settings for logging messages to local
switch memory, to an SMTP event handler, or to a remote syslog server.
Syntax
show logging
{
flash
|
ram
|
sendmail
|
trap
}
•
flash
- Displays settings for storing event messages in flash memory
(i.e., permanent memory).
•
ram
- Displays settings for storing event messages in temporary RAM
(i.e., memory flushed on power reset).
•
sendmail
- Displays settings for the SMTP event handler (page 23-35).
•
trap
- Displays settings for the trap function.
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message level for
flash memory is “errors” (i.e., default level 3 - 0), and the message level for RAM is
“debugging” (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging: Enabled
History logging in FLASH: level errors
Console#show logging ram
Syslog logging: Enabled
History logging in RAM: level debugging
Console#
Table 23-10 show logging flash/ram - display description
Field
Description
Syslog logging
Shows if system logging has been enabled via the
logging on
command.
History logging in FLASH The message level(s) reported based on the
logging history
command.
History logging in RAM
The message level(s) reported based on the
logging history
command.
Summary of Contents for 8926EM
