manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 414

System Management Commands

23-8

23

Command Usage 

The session used to execute this command is indicated by a “*” symbol next to 
the Line (i.e., session) index number.

Example 

show version

This command displays hardware and software version information for the system.

Default Setting 

None

Command Mode 

Normal Exec, Privileged Exec

Command Usage 

See "Displaying Switch Hardware/Software Versions" on page 4-3 for detailed 
information on the items displayed by this command.

Console#show users
 Username accounts:
  Username Privilege Public-Key
  -------- --------- ----------
     admin        15       None
     guest         0       None
     steve        15        RSA

 Online users:
  Line        Username Idle time (h:m:s) Remote IP addr.
  ----------- -------- ----------------- ---------------
  0   console    admin           0:14:14
* 1     VTY 0    admin           0:00:00    192.168.1.19
  2     SSH 1    steve           0:00:06    192.168.1.19

 Web online users:
  Line        Remote IP addr Username Idle time (h:m:s).
  ----------- -------------- -------- ------------------
 1      HTTP   192.168.1.19    admin           0:00:00

Console#

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands