manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 395

Entering Commands

21-7

21

Configuration Commands

Configuration commands are privileged level commands used to modify switch 
settings. These commands modify the running configuration only and are not saved 
when the switch is rebooted. To store the running configuration in non-volatile 
storage, use the 

copy running-config startup-config

 command.

The configuration commands are organized into different modes:

• Global Configuration - These commands modify the system level configuration, 

and include commands such as 

hostname

 and 

snmp-server community

. 

• Access Control List Configuration - These commands are used for packet filtering.
• Class Map Configuration - Creates a DiffServ class map for a specified traffic type.
• DHCP Configuration - These commands are used to configure the DHCP server.
• Interface Configuration - These commands modify the port configuration such as 

speed-duplex

 and 

negotiation

. 

• Line Configuration - These commands modify the console port and Telnet 

configuration, and include command such as 

parity

 and 

databits

.

• Multiple Spanning Tree Configuration - These commands configure settings for the 

selected multiple spanning tree instance.

• Policy Map Configuration - Creates a DiffServ policy map for multiple interfaces.
• Router Configuration - These commands configure global settings for unicast 

routing protocols.

• VLAN Configuration - Includes the command to create VLAN groups.

To enter the Global Configuration mode, enter the command 

configure

 in Privileged 

Exec mode. The system prompt will change to “Console(config)#” which gives you 
access privilege to all Global Configuration commands. 

Username: guest
Password: [guest login password]

  CLI session with the SMC TigerStack II 10/100/1000 SMC8926EM/SMC8950EM 
is opened.

  To end the CLI session, enter [Exit].

Console>enable
Password: [privileged level password]
Console#

Console#configure
Console(config)#

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands