SMC Networks 8926EM Management Manual Download Page 704

Page: 704 / 792

IP Interface Commands

41-24

parameter error

The number of ICMP Parameter Problem messages sent by the interface.

parameter header

The number of Send ICMP parameter problem messages caused by an

unrecognized header error.

parameter option

The number of Send ICMP parameter problem messages caused by an

unrecognized option error.

hopcount expired

The number of Send ICMP parameter problem messages caused by the hop limit

being exceeded in transit.

reassembly timeout

The number of Send ICMP parameter problem messages caused by the fragment

reassembly time being exceeded.

too big

The number of ICMP Packet Too Big messages sent by the interface.

echo request

The number of ICMP Echo (request) messages sent by the interface.

echo reply

The number of ICMP Echo Reply messages sent by the interface.

group query

The number of ICMPv6 Group Membership Query messages sent.

group report

The number of ICMPv6 Group Membership Response messages sent.

group reduce

The number of ICMPv6 Group Membership Reduction messages sent.

router solicit

The number of ICMP Router Solicitation messages sent by the interface.

router advert

The number of ICMP Router Advertisement messages sent by the interface.

redirects

The number of Redirect messages sent. For a host, this object will always be zero,

since hosts do not send redirects.

neighbor solicit

The number of ICMP Neighbor Solicitation messages sent by the interface.

neighbor advert

The number of ICMP Neighbor Advertisement messages sent by the interface.

UDP Statistics

input

The total number of UDP datagrams delivered to UDP users.

checksum errors

The total number of UDP packet checksum errors.

length errors

The total number of UDP header length errors.

no port

The total number of received UDP datagrams for which there was no application

at the destination port.

dropped

The number of times the system encounter an error when trying to queue the

received packet.

output

The total number of UDP datagrams sent from this entity.

TCP Statistics

input

The total number of segments received, including those received in error. This
count includes segments received on currently established connections.

checksum errors

The total number of TCP packet checksum errors.

output

The total number of segments sent, including those on current connections but

excluding those containing only retransmitted octets.

retransmitted

The total number of segments retransmitted - that is, the number of TCP segments

transmitted containing one or more previously transmitted octets.

Table 41-5 show ipv6 traffic - display description

(Continued)

Field

Description

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8926EM

Reviews:

Related manuals for 8926EM

Brands by name

Popular brands

SMC Networks 8926EM, Management Manual

Search results

Summary of Contents for 8926EM

Reviews:

Related manuals for 8926EM

Brands by name

Popular brands