manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 585

spanning-tree mst port-priority

33-17

33

spanning-tree mst port-priority

This command configures the interface priority on a spanning instance in the 
Multiple Spanning Tree. Use the 

no

 form to restore the default.

Syntax 

spanning-tree mst 

instance_id

 port-priority 

priority

no spanning-tree mst 

instance_id

 port-priority

•

instance_id

 - Instance identifier of the spanning tree. 

(Range: 0-4094, no leading zeroes)

•

priority

 - Priority for an interface. (Range: 0-240 in steps of 16)

Default Setting 

128

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

• This command defines the priority for the use of an interface in the multiple 

spanning-tree. If the path cost for all interfaces on a switch are the same, the 
interface with the highest priority (that is, lowest value) will be configured as 
an active link in the spanning tree. 

• Where more than one interface is assigned the highest priority, the interface 

with lowest numeric identifier will be enabled. 

Example 

Related Commands

spanning-tree mst cost (33-16)

spanning-tree protocol-migration

This command re-checks the appropriate BPDU format to send on the selected 
interface. 

Syntax 

spanning-tree

 

protocol-migration 

interface

interface

 

•

ethernet

 

unit

/

port

-

unit

 - Stack unit. (Range: 1-8) 

-

port

 - Port number. (Range: 1-26/50)

•

port-channel

 

channel-id

 (Range: 1-32) 

Console(config)#interface ethernet ethernet 1/5
Console(config-if)#spanning-tree mst 1 port-priority 0
Console(config-if)#

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands