SMC Networks 8926EM, Management Manual

Page: 401 / 792

22-1
Chapter 22: General Commands
These commands are used to control the command access mode, configuration
mode, and other basic functions.
enable
This command activates Privileged Exec mode. In privileged mode, additional
commands are available, and certain commands display additional information. See
"Understanding Command Modes" on page 21-6.
Syntax
enable [ level ]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• “super” is the default password required to change the command mode from
Normal Exec to Privileged Exec. (To set this password, see the enable
password command on page 25-3.)
Table 22-1 General Commands
Command Function Mode Page
enable Activates privileged mode NE 22-1
disable Returns to normal mode from privileged mode PE 22-2
configure Activates global configuration mode PE 22-2
show history Shows the command history buffer NE, PE 22-3
reload Restarts the system PE 22-4
prompt Customizes the CLI prompt GC 22-4
end Returns to Privileged Exec mode any
config.
mode
22-4
exit Returns to the previous configuration mode, or exits the CLI any 22-5
quit Exits a CLI session NE, PE 22-5
help Shows how to use help any NA
? Shows options for command completion (context sensitive) any NA