manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 299

Displaying the DNS Cache

16-5

16

Displaying the DNS Cache

You can display entries in the DNS cache that have been learned via the designated 
name servers.

Field Attributes

•

No

 – The entry number for each resource record.

•

Flag

 – The flag is always “4” indicating a cache entry and therefore unreliable.

•

Type

 – This field includes CNAME which specifies the canonical or primary name 

for the owner, and ALIAS which specifies multiple domain names which are 
mapped to the same IP address as an existing entry.

•

Type

 – This field includes ADDRESS which specifies the host address for the 

owner, and CNAME which specifies an alias.

•

IP

 – The IP address associated with this record.

•

TTL

 – The time to live reported by the name server.

•

Domain

 – The domain name associated with this record.

Web 

–

 

Select DNS, Cache.

Figure 16-3   DNS Cache

CLI - 

This example displays all the resource records learned from the designated 

name servers.

Console#show dns cache

38-7

NO      FLAG    TYPE    DOMAIN                          TTL     IP
0       4       Address www.times.com                   198     199.239.136.200
1       4       Address a1116.x.akamai.net              19      61.213.189.120
2       4       Address a1116.x.akamai.net              19      61.213.189.104
3       4       CNAME   graphics8.nytimes.com           19      POINTER TO:2
4       4       CNAME   graphics478.nytimes.com.edgesui 19      POINTER TO:2
Console#

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands