Link Aggregation Commands
28-6
28
lacp admin-key
(Port Channel)
This command configures a port channel's LACP administration key string. Use the
no
form to restore the default setting.
Syntax
lacp admin-key
key
[
no
]
lacp admin-key
key
- The port channel admin key is used to identify a specific link
aggregation group (LAG) during local LACP setup on this switch.
(Range: 0-65535)
Default Setting
0
Command Mode
Interface Configuration (Port Channel)
Command Usage
• Ports are only allowed to join the same LAG if (1) the LACP system priority
matches, (2) the LACP port admin key matches, and (3) the LACP port
channel key matches (if configured).
• If the port channel admin key (
lacp admin key
- Port Channel) is not set when
a channel group is formed (i.e., it has the null value of 0), this key is set to the
same value as the port admin key (
lacp admin key
- Ethernet Interface) used
by the interfaces that joined the group. Note that when the LAG is no longer
used, the port channel admin key is reset to 0.
Example
lacp port-priority
This command configures LACP port priority. Use the
no
form to restore the default
setting.
Syntax
lacp
{
actor
|
partner
}
port-priority
priority
no lacp
{
actor
|
partner
}
port-priority
•
actor
- The local side an aggregate link.
•
partner
- The remote side of an aggregate link.
•
priority
- LACP port priority is used to select a backup link. (Range: 0-65535)
Default Setting
32768
Console(config)#interface port-channel 1
Console(config-if)#lacp admin-key 3
Console(config-if)#
Summary of Contents for 8926EM
