manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 457

snmp-server enable traps

24-7

24

supports. If the 

snmp-server host

 command does not specify the SNMP 

version, the default is to send SNMP version 1 notifications.

• If you specify an SNMP Version 3 host, then the community string is 

interpreted as an SNMP user name. If you use the V3 “auth” or “priv” options, 
the user name must first be defined with the 

snmp-server user

 command. 

Otherwise, the authentication password and/or privacy password will not 
exist, and the switch will not authorize SNMP access for the host. However, if 
you specify a V3 host with the “noauth” option, an SNMP user account will be 
generated, and the switch will authorize SNMP access for the host.

Example 

Related Commands

snmp-server enable traps (24-7)

snmp-server enable traps

This command enables this device to send Simple Network Management Protocol 
traps or informs (i.e., SNMP notifications). Use the 

no

 form to disable SNMP 

notifications.

Syntax 

[

no

]

 snmp-server enable traps

 [

authentication

 | 

link-up-down

]

•

authentication

 - Keyword to issue authentication failure notifications. 

•

link-up-down

 - Keyword to issue link-up or link-down notifications. 

Default Setting 

Issue authentication and link-up-down traps.

Command Mode 

Global Configuration

Command Usage 

• If you do not enter an 

snmp-server enable traps

 command, no notifications 

controlled by this command are sent. In order to configure this device to send 
SNMP notifications, you must enter at least one 

snmp-server enable traps

 

command. If you enter the command with no keywords, both authentication 
and link-up-down notifications are enabled. If you enter the command with a 
keyword, only the notification type related to that keyword is enabled. 

• The 

snmp-server enable traps

 command is used in conjunction with the 

snmp-server host

 command. Use the 

snmp-server host

 command to 

specify which host or hosts receive SNMP notifications. In order to send 
notifications, you must configure at least one 

snmp-server host

 command. 

• The authentication, link-up, and link-down traps are legacy notifications, and 

therefore when used for SNMP Version 3 hosts, they must be enabled in 

Console(config)#snmp-server host 10.1.19.23 batman
Console(config)#

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands