Routing Information Protocol (RIP)
42-9
42
network
This command specifies the network interfaces that will be included in the RIP
routing process. Use the
no
form to remove an entry.
Syntax
[
no
]
network
subnet-address
subnet-address
– IP address of a network directly connected to this router.
Command Mode
Router Configuration
Default Setting
No networks are specified.
Command Usage
• RIP only sends updates to interfaces specified by this command.
• Subnet addresses are interpreted as class A, B or C, based on the first field
in the specified address. In other words, if a subnet address nnn.xxx.xxx.xxx
is entered, the first field (nnn) determines the class:
0 - 127 is class A, and only the first field in the network address is used.
128 - 191 is class B, and the first two fields in the network address are used.
192 - 223 is class C, and the first three fields in the network address are used.
Example
This example includes network interface 10.1.0.0 in the RIP routing process.
Related Commands
router rip (42-6)
neighbor
This command defines a neighboring router with which this router will exchange
routing information. Use the
no
form to remove an entry.
Syntax
[
no
]
neighbor
ip-address
ip-address
- IP address to map to a specified hardware address.
Command Mode
Router Configuration
Default Setting
No neighbors are defined.
Console(config-router)#network 10.1.0.0
Console(config-router)#
Summary of Contents for 8926EM
