manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 162

User Authentication

6-26

6

Filtering IP Addresses for Management Access

You can create a list of up to 16 IP addresses or IP address groups that are allowed 
management access to the switch through the web interface, SNMP, or Telnet.

Command Usage

• The management interfaces are open to all IP addresses by default. Once you add 

an entry to a filter list, access to that interface is restricted to the specified 
addresses.

• If anyone tries to access a management interface on the switch from an invalid 

address, the switch will reject the connection, enter an event message in the 
system log, and send a trap message to the trap manager.

• IP address can be configured for SNMP, web and Telnet access respectively. Each 

of these groups can include up to five different sets of addresses, either individual 
addresses or address ranges. 

• When entering addresses for the same group (i.e., SNMP, web or Telnet), the 

switch will not accept overlapping address ranges. When entering addresses for 
different groups, the switch will accept overlapping address ranges.

• You cannot delete an individual address from a specified range. You must delete 

the entire range, and reenter the addresses.

• You can delete an address range just by specifying the start address, or by 

specifying both the start address and end address. 

Command Attributes

•

Web IP Filter

 – Configures IP address(es) for the web group.

•

SNMP IP Filter

 – Configures IP address(es) for the SNMP group.

•

Telnet IP Filter

 – Configures IP address(es) for the Telnet group.

•

IP Filter List

 – IP address which are allowed management access to this interface.

•

Start IP Address

 – A single IP address, or the starting address of a range.

•

End IP Address

 – The end address of a range.

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands