Event Logging Commands
23-27
23
logging history
This command limits syslog messages saved to switch memory based on severity.
The
no
form returns the logging of syslog messages to the default level.
Syntax
logging history
{
flash
|
ram
}
level
no logging history
{
flash
|
ram
}
•
flash
- Event history stored in flash memory (i.e., permanent memory).
•
ram
- Event history stored in temporary RAM (i.e., memory flushed on
power reset).
•
level
- One of the levels listed below. Messages sent include the selected
level down to level 0. (Range: 0-7)
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
The message level specified for flash memory must be a higher priority (i.e.,
numerically lower) than that specified for RAM.
Example
Table 23-9 Logging Levels
Level
Severity Name
Description
7
debugging
Debugging messages
6
informational
Informational messages only
5
notifications
Normal but significant condition, such as cold start
4
warnings
Warning conditions (e.g., return false, unexpected return)
3
errors
Error conditions (e.g., invalid input, default used)
2
critical
Critical conditions (e.g., memory allocation, or free
memory error - resource exhausted)
1
alerts
Immediate action needed
0
emergencies
System unusable
* There are only Level 2, 5 and 6 error messages for the current firmware release.
Console(config)#logging history ram 0
Console(config)#
Summary of Contents for 8926EM
