manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 295

16-1

Chapter 16: Domain Name Service

The Domain Naming System (DNS) service on this switch allows host names to be 
mapped to IP addresses using static table entries or by redirection to other name 
servers on the network. When a client device designates this switch as a DNS 
server, the client will attempt to resolve host names into IP addresses by forwarding 
DNS queries to the switch, and waiting for a response. 

You can manually configure entries in the DNS table used for mapping domain 
names to IP addresses, configure default domain names, or specify one or more 
name servers to use for domain name to address translation. 

Configuring General DNS Service Parameters 

Command Usage

• To enable DNS service on this switch, first configure one or more name servers, 

and then enable domain lookup status.

• To append domain names to incomplete host names received from a DNS client 

(i.e., not formatted with dotted notation), you can specify a default domain name or 
a list of domain names to be tried in sequential order.

• If there is no domain list, the default domain name is used. If there is a domain list, 

the system will search it for a corresponding entry. If none is found, the default 
domain name is used.

• When an incomplete host name is received by the DNS service on this switch and 

a domain name list has been specified, the switch will work through the domain list, 
appending each domain name in the list to the host name, and checking with the 
specified name servers for a match.

• When more than one name server is specified, the servers are queried in the 

specified sequence until a response is received, or the end of the list is reached 
with no response. 

• Note that if all name servers are deleted, DNS will automatically be disabled.

Command Attributes

•

Domain Lookup Status

 – Enables DNS host name-to-address translation.

•

Default Domain Name

18

 – Defines the default domain name appended to 

incomplete host names. (Range: 1-127 alphanumeric characters)

•

Domain Name List

18

 – Defines a list of domain names that can be appended to 

incomplete host names. (Range: 1-127 alphanumeric characters; 1-3 names)

•

Name Server List

 – Specifies the address of one or more domain name servers 

to use for name-to-address resolution. (Range: 1-6 IP addresses)

Note:

When specifying names, do not include the initial dot that separates the host name 
from the domain name.

18.  Do not include the initial dot that separates the host name from the domain name.

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands