manualshive.com logo in svg

SMC Networks 8926EM, Management Manual

Share
Download
SMC Networks 8926EM Management Manual Download Page 604

VLAN Commands

34-16

34

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

• QinQ tunneling must be enabled on the switch using the 

dot1q-tunnel 

system-tunnel-control

 command before the 

switchport dot1q-tunnel 

mode

 interface command can take effect.

• When a tunnel uplink port receives a packet from a customer, the customer 

tag (regardless of whether there are one or more tag layers) is retained in the 
inner tag, and the service provider’s tag added to the outer tag. 

• When a tunnel uplink port receives a packet from the service provider, the 

outer service provider’s tag is stripped off, and the packet passed on to the 
VLAN indicated by the inner tag. If no inner tag is found, the packet is passed 
onto the native VLAN defined for the uplink port. 

Example

Related Commands

show dot1q-tunnel

 

(34-17)

show interfaces switchport (27-11)

switchport dot1q-tunnel tpid

This command sets the Tag Protocol Identifier (TPID) value of a tunnel port. Use the 

no

 form to restore the default setting.

Syntax

switchport dot1q-tunnel tpid 

tpid

no switchport dot1q-tunnel tpid

tpid

 – Sets the ethertype value for 802.1Q encapsulation. This identifier is 

used to select a nonstandard 2-byte ethertype to identify 802.1Q tagged 
frames. The standard ethertype value is 0x8100. (Range: 0800-FFFF 
hexadecimal)

Default Setting 

0x8100

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

• Use the 

switchport dot1q-tunnel tpid

 command to set a custom 802.1Q 

ethertype value on the selected interface. This feature allows the switch to 
interoperate with third-party switches that do not use the standard 0x8100 
ethertype to identify 802.1Q-tagged frames. For example, 0x1234 is set as the 

Console(config)#interface ethernet 1/1
Console(config-if)#switchport dot1q-tunnel mode access
Console(config-if)#

Summary of Contents for 8926EM

























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands