SMC Networks 8648T - annexe 1, Management Manual

Page: 76 / 556

C
ONFIGURING THE
S
WITCH
3-28
Command Attributes
• SNTP Client – Configures the switch to operate as an SNTP unicast
client. This mode requires at least one time server to be specified in the
SNTP Server field.
• SNTP Broadcast Client – Configures the switch to operate as an
SNTP broadcast client. This mode requires no other configuration
settings; the switch will obtain time updates from time server
broadcasts (using the multicast address 224.0.1.1).
• SNTP Poll Interval – Sets the interval between sending requests for
a time update from a time server when set to SNTP Client mode.
(Range: 16-16284 seconds; Default: 16 seconds)
• SNTP Server – In unicast mode, sets the IP address for up to three
time servers. The switch attempts to update the time from the first
server, if this fails it attempts an update from the next server in the
sequence.
Web – Select SNTP, Configuration. Modify any of the required
parameters, and click Apply.
Figure 3-13. SNTP Configuration
CLI – This example configures the switch to operate as an SNTP
broadcast client.
Console(config)#sntp client 3-73
Console(config)#sntp poll 16 3-72
Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.2 3-71
Console(config)#sntp broadcast client 3-74
Console(config)#