![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704228.webp)
C
ONFIGURING
THE
S
WITCH
3-180
Web
– Click Priority, ACL Marker. Select a port and an ACL rule. To
specify a ToS priority, mark the Precedence/DSCP check box, select
Precedence or DSCP from the scroll-down box, and enter a priority. To
specify an 802.1p priority, mark the 802.1p Priority check box, and enter a
priority. Then click Add.
Figure 3-79. Changing Priorities Based on ACL Rules
CLI
– This example changes the DSCP priority for packets matching an
IP ACL rule, and the 802.1p priority for packets matching a MAC ACL
rule.
Console(config)#interface ethernet 1/1
3-168
Console(config-if)#match access-list ip bill set dscp 0
3-133
Console(config-if)#match access-list mac mike set priority 0
3-147
Console(config-if)#end
Console#show marking
3-134
Interface ethernet 1/1
match access-list IP bill set DSCP 0
match access-list MAC a set priority 0
Summary of Contents for 8648T - annexe 1
