![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704212.webp)
C
ONFIGURING
THE
S
WITCH
3-164
Command Attributes
•
Default Priority
* – The priority that is assigned to untagged frames
received on the specified interface. (Range: 0 - 7, Default: 0)
•
Number of Egress Traffic Classes
– The number of queue buffers
provided for each port.
* CLI displays this information as “Priority for untagged traffic.”
Web
– Click Priority, Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click Apply.
Figure 3-70. Configuring Class of Service per Port
CLI
– This example assigns a default priority of 5 to port 3.
Console(config)#interface ethernet 1/3
3-168
Console(config-if)#switchport priority default 5
3-256
Console(config-if)#end
Console#show interfaces switchport ethernet 1/5
3-181
Information of Eth 1/5
Broadcast threshold: Enabled, 500 packets/second
Lacp status: Disabled
Ingress rate limit: disable,1000M bits per second
Egress rate limit: disable,1000M bits per second
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 5
Gvrp status: Disabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Console#
Summary of Contents for 8648T - annexe 1
