SMC Networks 8648T - annexe 1, Management Manual

Page: 254 / 556

C
OMMAND
L
INE
I
NTERFACE
4-10
• Interface Configuration - These commands modify the port
configuration such as
speed-duplex and negotiation .
• Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as
parity and
databits .
• VLAN Configuration - Includes the command to create VLAN
groups.
• Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
To enter the other modes, at the configuration prompt type one of the
following commands. Use the
exit or end command to return to the
Privileged Exec mode.
Console#configure
Console(config)#
Table 4-2. Configuration Commands
Mode Command Prompt Page
Line line {console | vty} Console(config-line)# 4-14
Access
Control
List access-list ip standard
access-list ip extended
access-list ip
mask-precedence
access-list mac
access-list mac
mask-precedence Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl) 4-114
Interface interface {ethernet port |
port-channel id | vlan id }
Console(config-if)# 4-167