![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704351.webp)
A
UTHENTICATION
C
OMMANDS
4-107
dot1x port-control
This command sets the dot1x mode on a port interface. Use the
no
form
to restore the default.
Syntax
dot1x port-control
{
auto
|
force-authorized
|
force-unauthorized
}
no dot1x port-control
•
auto
– Requires a dot1x-aware connected client to be authorized by
the RADIUS server. Clients that are not dot1x-aware will be denied
access.
•
force-authorized
– Configures the port to grant access to all
clients, either dot1x-aware or otherwise.
•
force-unauthorized
–
Configures the port to deny access to all
clients, either dot1x-aware or otherwise.
Default
force-authorized
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#
Summary of Contents for 8648T - annexe 1
