![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704302.webp)
C
OMMAND
L
INE
I
NTERFACE
4-58
Event Logging Commands
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The
no
form disables the logging process.
Syntax
[
no
]
logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory.
You can use the
logging history
command to control the type of error
messages that are stored.
Table 4-14. Event Logging Commands
Command
Function
Mode Page
logging on
Controls logging of error messages
GC
4-58
logging history
Limits syslog messages saved to switch
memory based on severity
GC
4-59
logging host
Adds a syslog server host IP address that will
receive logging messages
GC
4-60
logging facility
Sets the facility type for remote logging of
syslog messages
GC
4-61
logging trap
Limits syslog messages saved to a remote
server based on severity
GC
4-62
clear logging
Clears messages from the logging buffer
PE
4-62
show logging
Displays the state of logging
PE
4-63
Summary of Contents for 8648T - annexe 1
