![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704195.webp)
VLAN C
ONFIGURATION
3-147
Web
– Click VLAN, 802.1Q VLAN, Basic Information.
Figure 3-60. Displaying Basic VLAN Information
CLI
– Enter the following command.
Displaying Current VLANs
The VLAN Current Table shows the current port members of each
VLAN and whether or not the port supports VLAN tagging. Ports
assigned to a large VLAN group that crosses several switches should use
VLAN tagging. However, if you just want to create a small port-based
VLAN for one or two switches, you can disable tagging.
Command Attributes
(Web)
•
VLAN ID
– ID of configured VLAN (1-4094).
•
Up Time at Creation
– Time this VLAN was created (i.e., System Up
Time).
•
Status
– Shows how this VLAN was added to the switch.
-
Dynamic GVRP
: Automatically learned via GVRP.
-
Permanent
: Added as a static entry.
•
Egress Ports
– Shows all the VLAN port members.
•
Untagged Ports
– Shows the untagged VLAN port members.
Console#show bridge-ext
3-251
Max support vlan numbers: 255
Max support vlan ID: 4094
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: Yes
Traffic classes: Enabled
Global GVRP status: Disabled
GMRP: Disabled
Console#
Summary of Contents for 8648T - annexe 1
