C
ONFIGURING
THE
S
WITCH
3-50
Web
– Click Security, Port Security. Set the action to take when an invalid
address is detected on a port, mark the checkbox in the Status column to
enable security for a port, set the maximum number of MAC addresses
allowed on a port, and click Apply.
Figure 3-22. Configuring Port Security
CLI
– This example sets the command mode to Port 5, sets the port
security action to send a trap and disable the port, and then enables port
security for the switch.
Console(config)#interface ethernet 1/5
Console(config-if)#port security action trap-and-shutdown
3-102
Console(config-if)#port security
Console(config-if)#
Summary of Contents for 8648T - annexe 1
