C
OMMAND
L
INE
I
NTERFACE
4-217
Command Usage
The MST region name and revision number (page 4-217) are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
Example
Related Commands
revision (4 -217)
revision
This command configures the revision number for this multiple spanning
tree configuration of this switch. Use the
no
form to restore the default.
Syntax
revision
number
number
- Revision number of the spanning tree.
(Range: 0-65535)
Default Setting
0
Command Mode
MST Configuration
Command Usage
The MST region name (page 4-216) and revision number are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
Console(config-mstp)#name R&D
Console(config-mstp)#
Summary of Contents for 8648T - annexe 1
