![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704134.webp)
C
ONFIGURING
THE
S
WITCH
3-86
Web
– Click Port, Port Configuration or Trunk Configuration. Modify the
required interface settings, and click Apply.
Figure 3-37. Configuring Port Attributes
CLI
– Select the interface, and then enter the required settings.
Creating Trunk Groups
You can create multiple links between devices that work as one virtual,
aggregate link. A port trunk offers a dramatic increase in bandwidth for
network segments where bottlenecks exist, as well as providing a
fault-tolerant link between two devices. You can create up to six trunks at a
time.
Console(config)#interface ethernet 1/13
3-168
Console(config-if)#description RD SW#13
3-168
Console(config-if)#shutdown
3-175
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
3-170
Console(config-if)#speed-duplex 100half
3-169
Console(config-if)#flowcontrol
3-173
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
3-172
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#exit
Console(config)#interface ethernet 1/21
Console(config-if)#combo-forced-mode copper-forced
3-174
Console(config-if)#
Summary of Contents for 8648T - annexe 1
