![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704531.webp)
IP I
NTERFACE
C
OMMANDS
4-286
Note:
Before you can change the IP address, you must first clear the
current address with the
no
form of this command.
Example
In the following example, the device is assigned an address in VLAN 1.
Related Commands
ip dhcp restart (4 -286)
ip dhcp restart
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode via the
ip
address
command.
• DHCP requires the server to reassign the client’s last address if
available.
If the BOOTP or DHCP server has been moved to a different domain,
the network portion of the address provided to the client will be based
on this new domain.
Console(config)#interface vlan 1
Console(config-if)#ip address 192.168.1.5 255.255.255.0
Console(config-if)#
Summary of Contents for 8648T - annexe 1
