SMC Networks 8648T - annexe 1, Management Manual

Page: 461 / 556

S
PANNING
T
REE
C
OMMANDS
4-216
Default Setting
32768
Command Mode
MST Configuration
Command Usage
• MST priority is used in selecting the root bridge and alternate bridge
of the specified instance. The device with the highest priority
(i.e., lowest numerical value) becomes the MSTI root device.
However, if all devices have the same priority, the device with the
lowest MAC address will then become the root device.
• You can set this switch to act as the MSTI root device by specifying a
priority of 0, or as the MSTI alternate device by specifying a priority
of 16384.
Example
name
This command configures the name for the multiple spanning tree region
in which this switch is located. Use the
no form to clear the name.
Syntax
name name
name - Name of the spanning tree.
Default Setting
Switch’s MAC address
Command Mode
MST Configuration
Console(config-mstp)#mst 1 priority 4096
Console(config-mstp)#