![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704219.webp)
C
LASS
OF
S
ERVICE
C
ONFIGURATION
3-171
Mapping IP Precedence
The Type of Service (ToS) octet in the IPv4 header includes three
precedence bits defining eight different priority levels ranging from highest
priority for network control packets to lowest priority for routine traffic.
The default IP Precedence values are mapped one-to-one to Class of
Service values (i.e., Precedence value 0 maps to CoS value 0, and so forth).
Bits 6 and 7 are used for network control, and the other bits for various
application types. ToS bits are defined in the following table.
Command Attributes
•
IP Precedence Priority Table
–
Shows the IP Precedence to CoS
map.
•
Class of Service Value
–
Maps a CoS value to the selected IP
Precedence value. Note that “0” represents low priority and “7”
represent high priority.
Table 3-11. IP Precedence Prioruty
Priority Level
Traffic Type
Priority Level
Traffic Type
7
Network Control
3
Flash
6
Internetwork Control
2
Immediate
5
Critical
1
Priority
4
Flash Override
0
Routine
Summary of Contents for 8648T - annexe 1
