![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704318.webp)
C
OMMAND
L
INE
I
NTERFACE
4-74
sntp broadcast client
This command synchronizes the switch’s clock based on time broadcast
from time servers (using the multicast address 224.0.1.1). Use the
no
form
to disable SNTP broadcast client mode.
Syntax
[
no
]
sntp broadcast client
Default Setting
Disabled
Command Mode
Global Configuration
Example
show sntp
This command displays the current time and configuration settings for the
SNTP client, and indicates whether or not the local time has been properly
updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for
sending time synchronization requests (when the switch is set to SNTP
client mode), and the current SNTP mode (i.e., client or broadcast).
Example
Console(config)#sntp broadcast client
Console#
Console#show sntp
Current time: Dec 23 05:13:28 2002
Poll interval: 16
Current mode: unicast
Console#
Summary of Contents for 8648T - annexe 1
