![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704514.webp)
C
OMMAND
L
INE
I
NTERFACE
4-269
Example
The following example shows how to map IP DSCP value 1 to CoS value 0.
show map ip port
Use this command to show the IP port priority map.
Syntax
show map ip port
[
interface
]
interface
•
ethernet
unit
/
port
-
unit
- This is device 1.
-
port
- Port number.
•
port-channel
channel-id
(Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#
Console#show map ip port
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5 80 0
Console#
Summary of Contents for 8648T - annexe 1
