![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704224.webp)
C
ONFIGURING
THE
S
WITCH
3-176
Click Priority, IP Port Priority. Select a port or trunk from the Interface
field. Enter the port number for a network application in the IP Port
Number box and the new CoS value in the Class of Service box, and then
click Add IP Port.
Figure 3-78. IP Port Priority Mapping
CLI
– The following example globally enables IP Port Priority service on
the switch, maps HTTP traffic (on port 1) to CoS value 0, and then
displays the IP Port Priority settings.
Note:
Mapping specific values for IP Port Priority is implemented as an
interface configuration command, but any changes will apply to
the all interfaces on the switch.
Console(config)#map ip port
3-94
Console(config)#interface ethernet 1/1
3-168
Console(config-if)#map ip port 80 cos 0
3-264
Console(config-if)#end
Console#show map ip port ethernet 1/5
3-269
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 1 80 0
Console#
Summary of Contents for 8648T - annexe 1
