![background image](http://html1.mh-extra.com/html/smc-networks/8648t-annexe-1/8648t-annexe-1_management-manual_1300704259.webp)
L
INE
C
OMMANDS
4-15
line
This command identifies a specific line for configuration, and to process
subsequent line configuration commands.
Syntax
line
{
console
|
vty
}
•
console
- Console terminal line.
•
vty
- Virtual terminal for remote console access (i.e., Telnet).
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as
“Vty” in screen displays such as
show users
. However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
Example
To enter console line mode, enter the following command:
stopbits*
Sets the number of the stop bits transmitted per
byte
LC
4-24
disconnect
Terminates a line connection
PE
4-24
show line
Displays a terminal line's parameters
NE,
PE
4-25
Console(config)#line console
Console(config-line)#
Table 4-5. Line Command Syntax
Command
Function
Mode Page
* These commands only apply to the serial port.
Summary of Contents for 8648T - annexe 1
