![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753284.webp)
C
OMMAND
L
INE
I
NTERFACE
3-148
Command Usage
Assigns the same profile to each VDSL switch port. Details of these
profiles are given in the table below:
Notes: 1.
The actual data rates may be somewhat less than those shown
in the table above depending on the protocols/applications
used.
2.
If the “LL” type profile is selected, the error rate due to noise
in transmission is increased but the signal latency is reduced.
3.
The “Public” profiles conform to specific standards such as
ANSI or ETSI. The “Private” profiles do not conform to these
standards.
4.
Profiles “user-1” and “user-2” are user-configured profiles.
The values shown for the downstream and upstream rates are
Profile Name
Profile Type
Downstream Rate
(Mbps)
Upstream Rate
(Mbps)
default
Private
4.17
1.56
efm-5
Private
6.25
6.25
efm-10 Private
12.50
12.50
efm-15 Private
16.67
18.75
public-ansi Public
16.67
4.67
public-etsi
Public
12.50 4.67
efm-5 LL
Private
6.25
6.25
efm-10 LL
Private
12.50
12.50
efm-15 LL
Private
16.67
18.75
public-ansiLL
Public
16.67
4.67
public-etsiLL
Public
12.50 4.67
efm-15-3LL Private
16.67
3.13
efm-15-2LL
Private
16.67
2.08
efm-15-1LL
Private
16.67
1.56
efm-10-2 LL
Private
12.50
2.08
user-1
Private
4.00
1.00
user-2
Private
4.00
1.00
Summary of Contents for 7500A/VCP - annexe 1
