![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753232.webp)
C
OMMAND
L
INE
I
NTERFACE
3-96
Note:
The access mode shown in the table is indicated by these
abbreviations:
NE
(Normal Exec),
PE
(Privileged Exec),
GC
(Global Configuration),
IC
(Interface Configuration),
LC
(Line Configuration),
VC
(VLAN Database Configuration.)
vlan database
Use this command to enter VLAN database mode. All commands in this
mode will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the
show vlan
command.
• Use the
interface vlan
command mode to define the port
membership mode and add or remove ports from a VLAN. The
results of these commands are written to the running-configuration
file, and you can display this file by entering the
show
running-config
command.
Display VLAN Information
show vlan
Shows VLAN information
NE,
PE
3-104
show interfaces
status vlan
Displays status for the specified VLAN
interface
NE,
PE
3-76
show interfaces
switchport
Displays the administrative and operational
status of an interface
NE,
PE
3-78
Command
Function
Mode Page
Summary of Contents for 7500A/VCP - annexe 1
