![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753206.webp)
C
OMMAND
L
INE
I
NTERFACE
3-70
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to Ethernet port 25.
speed-duplex
Use this command to configure the speed and duplex mode of a given
interface when auto-negotiation is disabled. Use the
no
form to restore the
default.
Syntax
speed-duplex
{
1000full
|
100full
|
100half
|
10full
|
10half
}
no speed-duplex
•
1000full
- Forces 1000 Mbps full-duplex operation
•
100full
- Forces 100 Mbps full-duplex operation
•
100half
- Forces 100 Mbps half-duplex operation
•
10full
- Forces 10 Mbps full-duplex operation
•
10half
- Forces 10 Mbps half-duplex operation
Default Setting
•
Auto-negotiation is enabled by default.
•
When auto-negotiation is disabled, the default speed-duplex setting is
100half for 100BASE-TX ports, 100full for 100BASE-FX ports, and
1000full for Gigabit Ethernet ports.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
To force operation to the speed and duplex mode specified in a
speed-duplex command, use the no negotiation command to disable
auto-negotiation on the selected interface.
Console(config)#interface ethernet 1/25
Console(config-if)#description RD-SW#3
Console(config-if)#
Summary of Contents for 7500A/VCP - annexe 1
