![background image](http://html1.mh-extra.com/html/smc-networks/7500a-vcp-annexe-1/7500a-vcp-annexe-1_management-manual_1299753268.webp)
C
OMMAND
L
INE
I
NTERFACE
3-132
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Example
The following example shows how to enable IP precedence mapping
globally:
map ip precedence
(Interface Configuration)
Use this command to set IP precedence priority (i.e., IP Type of Service
priority.) Use the
no
form to restore the default table.
Syntax
map ip precedence
ip-precedence-value
cos
cos-value
no map ip precedence
•
precedence-value
- 3-bit precedence value. (Range: 0-7)
•
cos-value
- Class-of-Service value (Range: 0-7)
Default Setting
The list below shows the default priority mapping.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#map ip precedence
Console(config)#
IP Precedence Value
CoS Value
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
Summary of Contents for 7500A/VCP - annexe 1
